Protocol Converter for Pelco-d / Pelco-P to Kalatel Cyber Dome, CONV1-J
- Add feedback:
- Code: CONV1-J
-
Availability:
Produkt available
(shipping withing 24-48h)
The device must be physically connected between the camera control unit and Kalatel
Main features:
1) The exact mapping of the keyboard joystick movements operate on a Pelco-D
2) Realtime processing of multiple movement commands: Pan, Tilt, Zoom, Iris, Focus
3) Support the programming and calling PRESET positions
4) Support Pattern and Tour functions
5) Support full OSD menu of the camera by using PRESET functions
6) Supports up to 255 cameras by one converter Kalatel
7) Double-extension of the RS-485 bus by using separate drivers for input and output of the converter.
8) Adjustable baud rate.
List of conversions:
No |
Pelco D function |
Kalatel Function |
1 |
Move up / down / left / right |
Move up / down / left / right |
2 |
Zoom in / Zoom out |
Zoom in / Zoom out |
3 |
Focus Far / Focus Near |
Focus Far / Focus Near |
4 |
Iris open / Iris close |
Iris open / Iris close |
5 |
Call Preset 1~61 / Set preset 1~61 |
Call Preset 1~61 / Set preset 1~61 |
6 |
Call Preset 62~63 / Set Preset 62~63 |
Left / Right limit |
7 |
Call Preset 81~84 |
Tour start 1~4 |
8 |
Set Preset 95
After entry to camera menu: Call preset 1 ~ 9 Call preset 10 Call preset 11 Call preset 12 Call preset 13 Call preset 14 Call preset 15 Focus Far Focus Near Iris Close (-) Iris Open (+) |
Entry to OSD menu
Equivalent for KTD-405 Button "1” ~ „9” Button „0” Button „Clear” (ESC) Button „Set” (ENTER) Button „Prev” (◄◄) Button „Seq” (►►) Button „Alarm” Button „↑” Button „↓” Button „←” Button „→” |
9 |
Call Preset 95 |
Exit Menu |